Features
- Space Saving, High Density Distribution Center for Eight Circuits
- Fuse Protection and LED Indication in Each Circuit
- Provision for Fast Load Assessment with a Standard Volt-meter
- Simple, Straightforward wiring
- Low Cost, Easy Mounting
Applications
The ET24V provides cost effective way to distribute excitation power for DDC equipment (typically 24 VAC).
The board simplifies wiring and saves installation time. It provides a convenient way to power eight independent circuits with one control transformer.
The board may be used to power DDC panels, field devices and/or other Elkor interfaces.
Product Description
The ET24V provides eight fused power circuit for excitation of control equipment that may be supplied by one control transformer. The board speeds-up wiring and provides a convenient mean to manage control power distribution. The input current passes via a 0.1 R power resistor that acts as a shunt for load measurements with a standard AC Volt-meter applied to the Load Test jumper.
Each circuit is protected by a 2 A fast acting fuse. The fuse status is indicated by green LED. Disconnect jumper in each output allows for fast circuit separation and/or testing.
The board is equipped with extra connector to add more ET24V boards in to one larger power transformer if more than 8 circuits are required.
The board is equipped with angular connectors for fast and easy wiring. It mounts in a molded snap-track 2.75" (70 mm) wide, provided with each board.
Specifications
| Input | 24 VAC, 200 V A maximum | ||
| Output | 8 circuits, 2 Amp maximum (fused by fast acting GMA 2A fuses) recommended 5-6 Amp in total per board. | ||
| Indication | Voltage in each channel - green LED | ||
| Load Test | 0.1 R resistor in series with load w/ Volt-meter terminal Load = 10 x VAC measured | ||
| Dimensions | W=2.75" (70 mm); L=3.6" (92 mm); boards mounts in TR-2 snap-track (provided). | ||
Ordering Information
|
| |||||
Documentation
 |
Datasheet |
| Wiring Diagram |